본문 바로가기

FAQ

02

客户支持

FAQ
All
281 Results
A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    External auxiliary axis motion command when the jig is not clamped

  • Solution

    Jig status check. Jig related sensor and switch status check.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    The completion of M41 does not end within the set value (variable timer 70).

  • Solution

    Confirmation of material seating in Jig. Air seating device status check.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    The completion of M42 does not end within the set value (variable timer 71).

  • Solution

    Confirmation of material seating in Jig. Air seating device status check.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    The completion of M43 does not end within the set value (variable timer 72).

  • Solution

    Confirmation of material seating in Jig. Air seating device status check.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    When the jig is clamped, the material seating signal is not input.

  • Solution

    Jig status check. Jig related sensor and switch status check.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    External control additional axis is operated when the Z axis is not the origin position.

  • Solution

    Z-axis origin return.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    Robot call without door open.

  • Solution

    After adding the M code to open the door in the program, command M140 or M30/M02.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    An error occurred in the robot control unit.

  • Solution

    Instructions for robot control devices or inquiries from related companies are required.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    Servo Magazine alarm.

  • Solution

    Check the alarm number on the PMM screen. Checking and responding to alarm numbers in 'D PMM Alarm'.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    When using adaptive control, load detection up to caution levels.

  • Solution

    Checking the part program and hazardous level values.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    When using tool load monitoring, load detection up to caution levels.

  • Solution

    Checking the part program and hazardous level values.

A
  • RANK

    PMC Rank E Alarm

  • RANK Description

    The machine operation stops, and the main shaft also stops.

  • Cause

    Internal circuit break due to overcurrent of 110V power line.

  • Solution

    Check the cable routed to the breaker (QF13). Check the 110V power line.

A
  • RANK

    PMC Rank E Alarm

  • RANK Description

    The machine operation stops, and the main shaft also stops.

  • Cause

    When the spindle Lub pump is operating, the internal breaker is blocked due to overload.

  • Solution

    After removing the cause of the error of the breaker (QM47) setting value or more overcurrent, check the operation status.

A
  • RANK

    PMC Rank E Alarm

  • RANK Description

    The machine operation stops, and the main shaft also stops.

  • Cause

    Spindle cooling unit alarm.

  • Solution

    Contact the manufacturer and the relevant instructions for the unit.

A
  • RANK

    PMC Rank E Alarm

  • RANK Description

    The machine operation stops, and the main shaft also stops.

  • Cause

    The air pressure supplied to the machine is lower than the set pressure and kept for longer than the set time (variable timer 41).

  • Solution

    Check supply air pressure. Check air piping and pressure switch.