본문 바로가기

FAQ

02

Hỗ trợ khách hàng

FAQ
All
281 Results
A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    Magazine exact position sensor is not input or not input at the set time (variable timer 47).

  • Solution

    Check sensor and variable timer time settings.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    Simultaneous input of the Magazine Pot sensors.

  • Solution

    Check and adjust the sensor position.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    After the magazine pot rises, the sensor signal is not input within the specified time (variable timer 48).

  • Solution

    Check and adjust the sensor position. Pneumatic adjustment.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    After the magazine pot descends, the sensor signal is not input within the specified time (variable timer 49).

  • Solution

    Check and adjust the sensor position. Pneumatic adjustment.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    When 'M21' is commanded while the tool is placed in the tool breakage device, the input signal is not input.

  • Solution

    Check tool status.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    HAWE hydraulic pump continuously operates for more than 10 seconds.

  • Solution

    Check pressure switch status. Check the plumbing.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    This alarm corresponds to MCV 420UL, and the supporter signal is not input at the point where the column is out of the center position.

  • Solution

    Check position switch 01. Check supporter input signal.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    The pressure of a separate external hydraulic pump is kept below the set value for more than 3 seconds.

  • Solution

    Check pump operation. Check the amount of oil inside.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    When an additional axis is mounted, unclamp and clamp signals are input simultaneously

  • Solution

    Check sensor status. Check operation of solenoid valve.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    When an additional axis is mounted, unclamp and clamp signals are input simultaneously

  • Solution

    Check sensor status. Check operation of solenoid valve.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    Additional axis feed is in progress while the tail stock is not reversed.

  • Solution

    Check tail stock reverse sensor. Check tail stock operation status.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    Simultaneous input of automatic door opening and closing sensors.

  • Solution

    Check sensor location and operation. Check the solenoid valve operation.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    When the automatic door is opened, the sensor signal is not input within the set value (variable timer 50).

  • Solution

    Timer adjustment. Check piping and sensors.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    When the automatic door is closed, the sensor signal is not input within the set value (variable timer 51).

  • Solution

    Timer adjustment. Check piping and sensors.

A
  • RANK

    PMC Rank F Alarm

  • RANK Description

    Machine operation stops.

  • Cause

    When the automatic door is closed, the set value (variable timer 52) the internal closing sensor and the closing confirmation signal of the door interlock device are not input.

  • Solution

    Check the condition of the closing sensor and door interlock device. Timer correction according to the position of each sensor.