FAQ

PMC Rank I Alarm

Only the device is limited in motion and there is no obstacle to axis traversing.

Run maintenance mode for ATC arm and ATC Magazine together.

When the maintenance mode is released, it is automatically released. ATC Magazine is useful when using Servo.

PMC Rank I Alarm

Only the device is limited in motion and there is no obstacle to axis traversing.

Voltage drop in the battery inside the work probe.

Internal battery exchange. When the voltage is normal, the alarm is automatically released.

PMC Rank I Alarm

Only the device is limited in motion and there is no obstacle to axis traversing.

After selecting the work probe, the ready state signal is not input within 1 second.

Check work probe wiring and settings.

PMC Rank S Alarm

Limits on cycle start.

When the slide Lub pump is operating, the internal breaker is blocked due to overload.

After removing the cause of the error of the breaker (QM46) setting value or more overcurrent, check the operation status.

PMC Rank S Alarm

Limits on cycle start.

Coolant cooling unit alarm.

Check the unit's instruction manual or maintenance manual.

PMC Rank S Alarm

Limits on cycle start.

External cooling unit alarm.

Check the unit's instruction manual or maintenance manual.

PMC Rank S Alarm

Limits on cycle start.

External work counter completion alarm.

After resetting the counter direction of the external work counter, it is restarted.

PMC Rank S Alarm

Limits on cycle start.

Cycle start is executed while the feed override switch is set to more than 100%.

Switch set to 100% or less. When the switch exceeds 100%, cycle start is possible. K value change.

PMC Rank S Alarm

Limits on cycle start.

Automatic operation is executed when all axes have not established the origin.

Establish the origin of all axes.

PMC Rank S Alarm

Limits on cycle start.

Automatic operation is executed when the ATC Arm is not in the correct position.

After positioning the ATC Arm correctly, execute.

PMC Rank S Alarm

Limits on cycle start.

Automatic operation is executed when the spindle is not clamped.

After clamping the spindle, run.

PMC Rank S Alarm

Limits on cycle start.

Automatic operation is executed when ATC Magazine is not in the correct position.

After checking the location of ATC Magazine, run.

PMC Rank S Alarm

Limits on cycle start.

Automatic operation is executed when the magazine port is not in the correct position.

Check if the port position is on the spindle side or the magazine side, then run.

PMC Rank S Alarm

Limits on cycle start.

When operating the slide Lub pump, the pressure does not reach the set value within 20 seconds.

Check for pipe damage and air in the pipe. Check the pressure signal.

PMC Rank S Alarm

Limits on cycle start.

The oil level inside the slide Lub pump remains low for more than 2 seconds.

Filling the tank with oil. Check the operation of the water level sensor inside the tank.