FAQ

PMC Rank S Alarm

Limits on cycle start.

The oil level inside the hydraulic pump remains low for more than 2 seconds.

Filling the tank with oil. Check the operation of the water level sensor inside the tank.

PMC Rank S Alarm

Limits on cycle start.

The coolant level in the coolant tank is kept low for longer than the time set in the timer 42.

Filling the tank with oil. Check the operation of the water level sensor inside the tank. Timer 42 time adjustment.

PMC Rank S Alarm

Limits on cycle start.

The coolant level in the coolant tank remains high for more than the time set in the timer 43.

Drain coolant inside the tank. Check the operation of the water level sensor inside the tank. Timer 43 time adjustment.

PMC Rank S Alarm

Limits on cycle start.

Door release mode execution. Rapid feed (F0) and Jog feed are possible when the door is open. However, other operations are not possible.

When door release mode is released, automatic alarm is released

PMC Rank S Alarm

Limits on cycle start.

The tool usage value reaches the value set in the GUI tool life management.

After checking the tool, reset the set value.

PMC Rank S Alarm

Limits on cycle start.

WORK counter set value reached (GUI)

After checking the counter, reset the set value.

PMC Rank F Alarm

Machine operation stops.

When the coolant pump is running, the internal breaker is blocked due to overload.

After removing the cause of the error of the breaker (QM11) setting value or more overcurrent, check the operation status.

PMC Rank F Alarm

Machine operation stops.

When the ATC Arm is operating, the internal breaker is blocked due to overload.

After removing the cause of the error of the breaker (QM33) setting value or more overcurrent, check the operation status.

PMC Rank F Alarm

Machine operation stops.

When the ATC Magazine is operating, the internal breaker is blocked due to overload.

After removing the cause of the error of the breaker (QM32) setting value or more overcurrent, check the operation status.

PMC Rank F Alarm

Machine operation stops.

When the hydraulic pump is operating, the internal breaker is blocked due to overload.

After removing the cause of the error of the breaker (QM26) setting value or more overcurrent, check the operation status.

PMC Rank F Alarm

Machine operation stops.

When the HAWE hydraulic pump is operating, the internal breaker is blocked due to overload.

After removing the cause of the error of the breaker (QM26) setting value or more overcurrent, check the operation status.

PMC Rank F Alarm

Machine operation stops.

HAWE pump overheating.

Check the continuous operation of the pump due to a pressure error or pressure drop due to pipe damage.

PMC Rank F Alarm

Machine operation stops.

When the spindle through coolant pump is operating, the internal breaker is blocked due to overload.

After removing the cause of the error of the breaker (QM13) setting value or more overcurrent, check the operation status.

PMC Rank F Alarm

Machine operation stops.

When the spindle through coolant pump is operating, the internal breaker is blocked due to overload.

After removing the cause of the error of the breaker (QM14) setting value or more overcurrent, check the operation status.

PMC Rank F Alarm

Machine operation stops.

When operating the hydraulic pump, the pressure is lower than the set value.

Check the pump operation and the amount of oil inside.