FAQ

PMC Rank M Alarm

It does not interfere with machine operation and only displays messages.

Hard O.T. Turn off mode.

Hard O.T. Upon release, automatic alarm release.

PMC Rank M Alarm

It does not interfere with machine operation and only displays messages.

The door lock signal is not input within 1 second during cycle start with the door closed or during cycle start.

Check the door guard unit. Check door guard wiring.

PMC Rank M Alarm

It does not interfere with machine operation and only displays messages.

Run ATC Arm maintenance mode.

When the ATC Arm maintenance mode is released, the alarm is automatically released.

PMC Rank M Alarm

It does not interfere with machine operation and only displays messages.

Run ATC Magazine maintenance mode. Valid only for Servo Magazine.

When ATC Magazine maintenance mode is released, the alarm is automatically released.

PMC Rank M Alarm

It does not interfere with machine operation and only displays messages.

The critical level of tool life management set in the GUI screen has been reached.

Removed tool life value in GUI and lowered the critical level.

PMC Rank M Alarm

It does not interfere with machine operation and only displays messages.

The conveyor rotates in reverse.

When the conveyor reverse rotation is stopped, the alarm is automatically released.

PMC Rank M Alarm

It does not interfere with machine operation and only displays messages.

Using the Z-axis lock function.

When the function is released, the alarm is automatically released.

PMC Rank M Alarm

It does not interfere with machine operation and only displays messages.

Using the machine lock function.

When the function is released, the alarm is automatically released.

PMC Rank M Alarm

It does not interfere with machine operation and only displays messages.

Using the M.S.T. lock function.

When the function is released, the alarm is automatically released.

PMC Rank M Alarm

It does not interfere with machine operation and only displays messages.

Using the program restart function.

When the function is released, the alarm is automatically released.

PMC Rank M Alarm

It does not interfere with machine operation and only displays messages.

Using the handle interrupt function.

When the function is released, the alarm is automatically released.

PMC Rank M Alarm

It does not interfere with machine operation and only displays messages.

When using adaptive control, load detection up to dangerous levels.

Checking the part program and hazardous level values.

PMC Rank M Alarm

It does not interfere with machine operation and only displays messages.

When using tool load monitoring, load detection up to dangerous levels.

Checking the part program and hazardous level values.

PMC Rank I Alarm

Only the device is limited in motion and there is no obstacle to axis traversing.

When the lift-up chip conveyor is in operation, the residual material cannot be transferred.

After removing the residue inside the lift-up chip conveyor, check the operation status again.

PMC Rank I Alarm

Only the device is limited in motion and there is no obstacle to axis traversing.

During operation of the lift-up chip conveyor, the internal breaker is blocked due to overload.

After removing the cause of the load, check the operation status.